Full View
Liknande föremål
AHD 1080P Car Brake Light Rear View Reverse Camera For Renault Trafic Opel Combo 2001-2011 Vauxhall Vivaro 2001-2014
906,20kr1 326,67kr
Färg Namn : Black lens


Spänning : 12 V
12 V
Mängd :
Rapportera
Inkludera upphovsrättsintrångGratis standardfrakt. Se detaljer
Beräknad mellan Mon, Jul 6 och Sun, Jul 12
Du kan returnera produkten inom 30 dagar efter mottagandet. Se detaljer
Handla med självförtroende
Pengarna-tillbaka-garanti
Få varan du beställt eller pengarna tillbaka. Läs mer
About this item
Hämtad från LiveEasy
Seller assumes all responsibility for this listing.Artikelnummer: 37630562
Item specifics
Item description from the seller
Precautions before purchase:
(1)Please check if your Android monitor supports AHD720P/AHD1080P before purchasing
(2)Our car camera only supports Android Monitor. Please check carefully before purchasing
(3)Because there may be slight differences between carsproduced in different countries, please check the size beforebuying.
AHD 1080P/AHD 720P dual channel camera is only suitable for monitor with AHD function
CVBS/AHD dual channel camera, both CVBS and AHD monitor can be used, but corresponding channels need to be set to display normally. CVBS channel camera is suitable for most monitor, while AHD channel camera is only suitable for monitor with AHD function
*If AHD cannot be selected, AHD cameras are not supported!
Go to Car settings >> Factory setting >> Reverse (picture) settings
>> Select AHD 1080P
*If your Android device does not support AHD 1080P signal, you
need to set it to AHD 720P signal. Before setting it up, you need to
check if the car camera has switched to AHD 720P signal,
otherwise there may be no signal
Go to Car Setting >> Factory Setting >> Reverse (Picture) Setting
>> Select AHD 720P
Black lens
*If you need to switch the camera to AHD signal, simply cut the White line.
However, it should be noted that before cutting the line, you need to check
if your Android device supports AHD signal,
Golden lens
*If your Android unit does not support AHD 1080P signal, you can switch to
AHD 720P signal by cutting the White line.
Possible issues that may arise during
the installation process
After installation, black screen, no signal,
blurred screen, and black and white image appear
Resolvent:
1. Check if the camera cable is not properly connected
2. First, check if the Monitor is on the same channel as the camera,
as our camera is Dual channel camera, so it is necessary to confirm
whether the camera is a AHD1080P or AHD 720P channel, usually The
default is AHD1080P channel, and after cutting the green line,
it becomes AHD720P channel. After confirming the camera channel,
It is necessary to set up channels corresponding to the camera
on the car Monitor, such as the camera For AHD1080P channel,
the monitor needs to be set to AHD 1080P channel. If the camera If it is
a AHD 720P channel, set the Monitor to AHD 720P Channel





















videoklipp
Videos for this product







