AIYATO Anti-Lost Device Locator Tracker Replacement For AirTag FindMy Certified Exclusive Global Search

The Find My Network anti-loss device requires an iPhone SE, iPhone 6s or later models, or a seventh-generation iPod touch with iOS 14.5 or a newer version installed; or an iPad Pro, fifth-generation iPad or later models, iPad Air 2 or later models, or iPad mini 4 or later models with iPadOS 14.5 or a newer version installed.Same as Airtag Square product dimensions: length 33* width 33* thickness 9 mm, net weight 8.5g Square packaging dimensions: length 80* width 58* thickness 21 millimeters, gross weight 17.5g Rectangular dimensions: Length 57*Width 30*Thickness 7mm, Net weight 10.2g Rectangular packaging dimensions: length 80* width 58* thickness 21 millimeters, gross weight 21.5g Operating Instructions: ⚫Shut down: Press and hold the button for at least 3 seconds, accompanied by a shutdown prompt sound; ⚫Power On: After powering off, briefly press the button once, and you will hear a power-on prompt sound ⚫Remove the battery, then reinsert it: The device will power on by default, accompanied by a startup notification sound ⚫When the device is powered on, click the button: a sound will be heard ⚫When the device is powered on, double-click the button: in addition to the single-click alert sound, the alert sound will sound again ⚫Operation to unbind the anti-loss device locally: Quickly press the button 5 times, then 4 times in succession. Each time you press a button, you will hear a "beep" sound. Press and hold the button for the 5th time until you hear a reset prompt sound, then the unbinding is complete.This operation will clear the local pairing information of the anti-loss device and perform a sync reset. The main functions include: 1. Playback of prompt sounds. 1. In cases where a prompt sound is played, some of the prompt sounds may have different tones ⚫When the battery is first connected, the sound of the previously paired anti-loss device and the un-paired anti-loss device is different: a short ringtone ⚫Click to find the playback sound option within the APP page: Beep, beep, beep for 10 seconds; ⚫Click the button on the anti-loss device; beep ⚫Double-click the button on the anti-loss device; beep, beep, beep; ⚫After successful unbinding: a short ringtone; ⚫Power on: Beep; ⚫Shut down: Beep, beep; ⚫After successfully upgrading the anti-loss device firmware through the APP: a short ringtone. 2. Conditions for the APP to play a reminder sound: The anti-loss device and the phone must be within Bluetooth communication range in an open area without too many interference signals, with a maximum connection distance of 80m.